160mm working width Woodworking machine Four Side Moulder for for Soft wood strip
16 series Moulder
VH-M616 , VH-M516 , VH-M416 (all with working width 160 mm )
Similarities between VH-M616, VH-M516 and VH-M416
| 1. The machine body structure is made of casting Iron. Due to graphite in Cast iron is conducive to lubrication and oil storage, moulders have better wear resistance. Compared with steel, castings have better damping performance. Therefor Casting Iron machine body lay a good foundation for smooth running of the cutter shaft and feeding system; |
| 2. Inverter to feed with speed range 6-36m/min; |
| 3. Working width is 25-160 mm, working thickness is 8-120 mm; |
| 4. Control panel with new concept design is more visual. The adjustment of spindle is in front of the machine for convenience; |
| 5. Hard chromed worktable good provide wear resistance; |
| 6. The under drive roller is equipped for advancing feeding performance; |
| 7. Sealed safety enclosure is for the protection against noise and dust, and it is helpful for the safe operation; |
| 8. Optionally configured slotted plane for processing some semi-finished products. |
Difference between VH-M616, VH-M516 and VH-M416
 | Moulder VH-M616 has 6 cutter shafts, appliable for simple four side planing, the first top and bottom cutter shafts are for rough machining. And the second top and bottom cutter shafts are use to finishing some slightly complex decorative wooden line. The bottom shafts can modify saw blade. Compare with the other two type moulders, products made by VH-M616 has better product smoothness. Also this machine also reduce tool wear and enhance service life. woo |
| Moulder VH-M516 has 5 cutter shafts, appliable for simple four side planing and moulding processing, the second bottom cutting shaft can process decorative wooden frame or it can flexibly modify a small saw blade for making mulitiple thin slice. frame |
| Moulder VH-M416 has 4 cutter shafts, similar with VH-M416 it also appliable for simple four side planing, the left, right, top cutter shafts are for small cutting moulding. The bottom shaft can use flat knife, which is adapted to the machining of flat surfaces |
| Model | | VH-M616 | VH-M516 | VH-M416 |
| Specification | Working width (mm) | 25-160 | 25-160 | 25-160 |
| | Working thickness (mm) | 8-120 | 8-120 | 8-120 |
| | Working table length | 1500 | 1500 | 1500 |
| | Feeding speed | 6-36 | 6-36 | 6-36 |
| | Main spindle diameter (mm) | Φ 40 | Φ 40 | Φ 40 |
| | Main spindle revolution(r/min) | 6500 | 6500 | 6500 |
| | Air pressure (Mpa) | 0.6 | 0.6 | 0.6 |
| Motor power(KW) | 1st LowerShaft | 4kw/5.5HP | 4kw/5.5HP | 4kw/5.5HP |
| | Right vertical spindle | 4kw/5.5HP | 4kw/5.5HP | 4kw/5.5HP |
| | Left vertical spindle | 4kw/5.5HP | 4kw/5.5HP | 4kw/5.5HP |
| | 1st UpperShaft | 5.5kw/7.5HP | 5.5kw/7.5HP | 5.5kw/7.5HP |
| | 2nd UpperShaft | 4kw/5.5HP | / | / |
| | 2nd Lower Shaft | 4kw/5.5HP | 4kw/5.5HP | / |
| | Feeding beam lifting | 0.55kw/0.75HP | 0.55kw/0.75HP | 0.55kw/0.75HP |
| | Feeding motor | 3kw/4HP | 3kw/4HP | 3kw/4HP |
| | Total power | 29.05kw/39.5HP | 25.05kw/34HP | 21.05kw/28.6HP |
| Cutter diameter | 1st Lower Shaft | Φ 125 | Φ 125 | Φ 125 |
| | Right Vertical spindle | Φ 125-Φ 160 | Φ 125-Φ 160 | Φ 125-Φ 160 |
| | Left vertical spindle | Φ 125-Φ 160 | Φ 125-Φ 160 | Φ 125-Φ 160 |
| | 1st Upper Shaft | Φ 125-Φ 160 | Φ 125-Φ 160 | Φ 125-Φ 160 |
| | 2nd Upper Shaft | Φ 125-Φ 160 | / | / |
| | 2nd Lower Shaft | Φ 125-Φ 180 | Φ 125-Φ 180 | / |
| Remark | Feeding wheel diameter (mm) | Φ140 | Φ140 | Φ140 |
| | Dust outlet diameter(mm) | Φ140 | Φ140 | Φ140 |
The four side planer is a planer machine in the cabinet and the customized home furnishing industry. It is mainly used
for processing wooden square, board, strip, decorative line and wooden handicraft. It planes the top, bottom, left and
right of wood. The precise width, thickness, cross-sectional shape and surface finish can be obtained from the wood
parts processed.
In the cabinet industry, the factory with general strength will buy the four sides plane. For example, there are four
planes in the cabinet furniture industry, such as a turbocharging system added inside the car.
Product Tags:
|
|
160mm Working Width Four Side Moulder Wood Planer Molder For For Soft Wood Strip Images
|
