Professional Six Head Moulder for processing Medium hard wood strip, MDF strip,floor,HDF strip,doors,solid wood furniture
Medium Type 4 Side Moulder VH-M616
There are some example of moulding below:
 |  |
| Solid wood picture frame | Solid wood line |
VH-M616 Product Details
| 1. Professional solution for processing Medium hard wood strip, MDF strip,floor,HDF strip,doors,solid wood furniture and Spuare boards. |
| 2. Inverter feeding speed range from 6 – 36m/min |
| 3. Each shaft have individual Motor , which can ensure maximum cutting power |
| 4. The adjustment of spindle is in front of the machine for convenience |
| 5. Hard chromed worktable good provide wear resistance |
| 6. The under drive roller is equipped for advancing feeding performance. |
| 7. Manual lubrication to the work table and carriage , easy to centralized control |
| 8. Configure well-known brand electrical components, strong stability |
| 9. Pneumatic pressure loading to top feed rollers separately adjustable, for easy of feeding stock with variation in thickness; |
| 10. Equipped the short material auxiliary device for improving the smoothness of feeding short piece material. |
| 11. Other alternative configurations: The normal plane can change to slotted plane for special requirement of the customers; Increaseing the power of motor; Changing voltage of the machine |
| Model | | VH-M616 |
| Specification | Working width | 25-160 |
| | Working thickness | 8-120 |
| | Working table length | 1500 |
| | Feeding speed | 6-36 |
| | Main spindle diameter (mm) | Φ 40 |
| | Main spindle revolution(r/min) | 6500 |
| | Air pressure (Mpa) | 0.6 |
| Motor power(KW) | 1st LowerShaft | 4kw/5.5HP |
| | Right vertical spindle | 4kw/5.5HP |
| | Left vertical spindle | 4kw/5.5HP |
| | 1st UpperShaft | 5.5kw/7.5HP |
| | 2nd UpperShaft | 4kw/5.5HP |
| | 2nd Lower Shaft | 4kw/5.5HP |
| | Feeding beam lifting | 0.55kw/0.75HP |
| | Feeding motor | 3kw/4HP |
| | Total power | 29.05kw/39.5HP |
| Cutter diameter | 1st Lower Shaft | Φ 125 |
| | Right Vertical spindle | Φ 125-Φ 160 |
| | Left vertical spindle | Φ 125-Φ 160 |
| | 1st Upper Shaft | Φ 125-Φ 160 |
| | 2nd Upper Shaft | Φ 125-Φ 160 |
| | 2nd Lower Shaft | Φ 125-Φ 180 |
| Remark | Feeding wheel diameter (mm) | Φ140 |
| | Dust outlet diameter(mm) | Φ140 |
General Safety Principles:
1. Operating the machine must be operated by professional and trained responsible personnel in accordance with
the regulations, otherwise there will be dangerous possibilities.
2. The operator must read the instructions carefully before starting the machine.
3. Operators should wear protective glasses, masks, hearing protectors and other labor protection products, and
not wear too loose clothes, watches, jewelry, long hair tied to the hat, in order to avoid accidental personal injury.
4. Keep the work site clean and hygienic. The stacking of articles shall not affect the operator's sight or occupy the
passage.
5. It is strictly forbidden to touch parts or parts that have not completely stopped running when the machine is
running.
6. It is strictly forbidden to dismantle any parts of the machine when it is running or when it is not completely
stopped.
Product Tags:
|
|
Professional Six Head Moulder For Solid Wood Furniture Processing 160 Mm Working Width Images
|
